JBA Upper Control Arms
Jeep Liberty a-arms, JBA Upper Control Arms
"Stop wasting money on factory
"Al's A-arms will give you a life time of durability."
Get the ORIGINAL after market upper control arms
Al's A arms!
If you'd like replaceable ball joints, grease able ball joints, heavy duty construction and welded by certified welders, then this might be the most important web page you'll ever read.
At Jeepin by Al LLC (JBA) we make the original after market upper control arms (UCA) or A-arms for the Jeep Liberty (KJ), we designed them better than Chrysler.
Now, I know you're probably skeptical. That's normal and healthy. Let me give you three good reasons we can back up what we claim:
Three Reasons To Believe What I Say
Reason one: Al Handy designed and built the first set of upper control arms (UCA) or a-arms in 2003! JBA first generation a-arms were born, we are now making the gen 4.5 our best design to date. There are hundreds of Jeepin by Al's a-arms in service all over the word.
Reason two: I have been designing and fabricating custom product for over 20 years.
Reason three: Jeepin by Al's a-arms are approved by All J Products, Rocklizards Fabrication and Jeff Daniels Jeep Customizing.
- 3/8 inch more strut clearance than the factory a-arms
- No banging noise going over bumps in the road!
- No more premature ball joint failure!
- You can replace the ball joint for under $35.00 per control arm
- we also make upper control arms for stock liberty's
- Stock KJ, Lifted KJ and Lifted KK
- No premature tire wear
- Your friends can see you got custom arms on your KJ
- Long lasting off road durability
- Precision and consistent parts every time!
- Made by Americans for ALL!!
Now, you're probably wondering how and why we can do all those things.
Let me explain.
The Jeepin' By Al Upper A-Arms were designed for your lifted Liberty and will directly replace your stock (UCA) upper control a-arms. The original equipment a-arm hits the spring, which causes premature ball joint failure on Liberty's with a lift kit. The Jeepin' By Al A-Arms are compatible with all the lift kits on the market today! These A-Arms were designed to fit on 2002 through 2007 Jeep Liberty's. (Now 07 KA & 08 KK) Made of heavy duty tubing, red powder coat finish, with Spicer HD replaceable ball joints and factory rubber bushings. The A arms are assembled and ready to bolt onto your Liberty. Sold as a set, 1 left & 1 right upper control arm (UCA).
Don't take my word for it.
Listen to what our customers say.
Testimonial: Hello Jeepin By Al
Testimonial: Thank you Marlin, Just a note to let you know that I have had the a arms and 3.5 " lift kit on for about a week now, and think that they are great. The jeep rides great and looks really good. I am very glad that I went with your a arms. Plus the service was outstanding! Ordered on a Fri and received on Mon. To any one who reads this, if you have a Jeep Liberty and want to lift it make sure u use Als A Arms.
Testimonial: JeepinAl, Just wanted to let you guys know I received the KJ upper control arms and put them on today. The arms installed fairly easy as I was expecting it to be an all day project. All contact I previously experienced with the ball joint/strut is gone now. Your Gen 4.5 arms have solved the problem I have lived with for a long time. I installed the lift shortly after buying my KJ new back in 02. The noise from the contact issue was very noticeable from the beginning. After having that issue I was concerned about even buying any other aftermarket products for the Jeep, including yours. Problem was once the lift and tires were on the vehicle there was no way I would be removing them, it just looked way too nice. Besides I have yet to see any other lifted Liberty's where I live. Your arms have taken away the concern I have had about imminent ball joint failure from being a reality. I just wanted to thank you for a making a great product that worked great for me.
Testimonial: They've held up great to all the wheeling I've done on them since they were installed at All-Js on May 24 2008. The arms have held up to Hell's Revenge, Fins $ Things, Porcupine Rim, Lockhart Basin/Hurrah Pass, Long Canyon Road and the White Rim Trail in Canyonlands National Park. Not to mention Big Eye Mine Road, a local trail here in Yuma, AZ.
Testimonial: http://www.myvirtualpaper.com/doc/JP-Freek/JPF-MVP_opt/2008121201/ Pg 41,
(picture of A-arm and the JBA Adjust-A-Strut Coilover system for the Jeep Liberty)
Warning: Do NOT make a bad investment in cheep imitation, Get the original upper A-arms for 02'-07' lifted Jeep Liberty's (also 08 KK Liberty's)
Own the genuine JBA upper control arms (UCA) for your peace of mind!!
There is a lot of confusion surrounding our field. I want to give you 7 criteria or elements you absolutely, positively must have in any solution you obtain:
1: Gives your struts clearance!
2: Replaceable ball joints!
3: Factory front wheel alignment!
4: Durability for off road use!
5: Bolts in the factory pockets in short order!
6: Factory rubber mounting bushings to isolate road noise! (no squeaking)
You will never need to replace your upper A-arms for the life of your KJ
Chrysler's factory control A-arms vs Al's upper a-arms, 3/8" [9.5mm] More Spring Clearance!
No tire rubbing with Al's Gen 4.5 A-arms!
You get at least 10 times your money's worth!
I have over $10,000.00 of R&D work into the gen 4.5 upper control arms. I spent month testing different ideas. For a fraction of time and cost you can have a set of JBA a-arms that will out last the factory a-arms 5 to 1.
In summary, here's what you are investing in:
Installation instructions, One set of Als a-arms, 2 Spicer ball joints, 4 mounting bushings, A-arms are full assembled and ready to bolt on your Jeep KJ.
If you respond right away, your investment is only $430.95 $395.95 plus shipping.
Act immediately and receive the following bonus
Since I know it's 100% to your benefit to act right away, I want to sweeten the pot and give you every possible reason to say YES today! If you respond immediately you get report on how to get the most out of your front suspension. Up to 9" of travel!
You can't lose with our 100%,
ironclad, money back guarantee
By the way, the bonus is yours to keep even in the unlikely event you decide to take advantage of our ironclad money back guarantee:
Your satisfaction is guaranteed with our 100%, no-questions-asked, iron-clad money-back guarantee. If you aren't absolutely thrilled with our product, just contact us (or send the product back) within 6 months and we'll refund 100% of your purchase price. No questions asked!
Here's how to get involved right now!
To order Als Upper A-arms for 02'-07' lifted Jeep Liberty just click the link below
Place order before 2:00 pm ET and your arms will ship the same day!
Shipping world wide w/ UPS & USPS!
Ship next day air for the emergency repair on your daily driver!
keep on Jeepin,
Jeepin By Al LLC.